MachinistCharts

The numbers you need at the bench.

Bolt torque, tap drills, drill sizes, ball bearing dimensions and steel grade equivalents, taken from the published standards, with the working shown on every page.

Try
Ø12S 18P 1.75
M12 × 1.75 hex boltClass 8.8: 88 N·m dry
26 bolt sizesMetric M4–M36 and inch 1/4"–1", each in three strength grades
80 threadsTap drill, decimal, metric equivalent and thread percentage
170 drill sizesNumber, letter and fractional drills with mm and nearest metric drill
72 bearingsDeep groove ball bearings: 60, 62, 63, 68, 69 series and miniatures
28 steel gradesAISI, EN, JIS and GB equivalents for stainless, alloy and tool steel
Free dataEvery chart as CSV and JSON under CC BY 4.0, plus llms.txt for AI tools

Bolt torque

Pick a size for dry and lubricated torque, clamp load, wrench and tap drill.

Tap drills

Hole sizes drawn to scale, like a drill index. Each page shows the thread the drill leaves.

Drill sizes

Number, letter and fractional drills in decimal inch and millimetres, with the nearest metric drill and the threads each one taps.

Ball bearings

Bore, outside diameter and width for deep groove ball bearings, drawn to scale, with sealed and shielded designations by maker.

Steel grade equivalents

The same steel under its American, European, Japanese and Chinese names, with notes on uses and machining.

Common steel grade equivalents
GradeEN numberJISChina GB
3041.4301SUS30406Cr19Ni10
3161.4401SUS31606Cr17Ni12Mo2
3031.4305SUS303Y12Cr18Ni9
10451.0503S45C45
41401.7225SCM44042CrMo
D21.2379SKD11Cr12Mo1V1

Nearest equivalents, not twins

Grades such as 304, 1.4301, SUS304 and 06Cr19Ni10 are close matches, but each standard sets its own limits. Use the chart to find the right family, then let the governing standard or the mill certificate decide.

Full equivalents chart

Calculated, not copied

Most torque charts online are copies of copies. Every number here is computed from the standard's own inputs, and each page shows the sum.

ISO 898-1Proof stress for metric property classes 8.8, 10.9 and 12.9
SAE J429Proof strength for inch grades 2, 5 and 8
ASME B1.1Unified thread series and tensile stress area for inch bolts
ISO 273Clearance hole sizes, close, normal and loose fit

Calculators

Arrow keys to move, Enter to open, Esc to close