M30 tap drill size
The tap drill for an M30 × 3.5 metric coarse thread is 26.5 mm (1.0433 in). It leaves about 77 % thread, the normal range for steel.
Choose a drill
Each option redraws the section above with the thread it would leave.
M30 thread data
How much thread you need
Thread percentage to aim for by material.
Bars run from 50 % to 90 % thread. Typical shop practice for cut taps. Harder, tougher materials take less thread to save the tap; soft materials need more engagement to hold.
How the percentage is worked out
- D
- 30 mm, major diameter
- drill
- 26.5 mm
- P
- 3.5 mm pitch
Why not 100 %?
Going from 75 % to 100 % thread adds only about 5 % strength but roughly triples the torque needed to turn the tap. That is why the standard drill leaves 70–80 %.
For cut taps the quick rule is drill = major diameter − pitch. Form (roll) taps displace metal instead of cutting it and need a larger hole, roughly D − 0.5 P; check the tap maker's chart.
Other metric coarse threads
Related guides
Common questions
What size drill for an M30 × 3.5 tap?
Use a 26.5 mm drill. It leaves about 77 % thread engagement.
What is 26.5 mm in inches?
26.5 mm is 1.0433 inch.
What size clearance hole for M30?
ISO 273 gives 31 mm for a close fit, 33 mm normal and 35 mm loose.
How tight should an M30 bolt be?
About 1,514 N·m for class 8.8 with dry threads.
What are M30 screw dimensions?
An M30 screw has a 30 mm major (outside) diameter and a 3.5 mm coarse pitch; the external thread minor diameter is about 25.71 mm. A hex head takes a 46 mm wrench (ISO 4017; 46 mm under DIN 933) and a socket head cap screw a 22 mm hex key.
What is M30 in inches?
M30 is 1.181 in in diameter (30 mm).