MachinistCharts

About the data

MachinistCharts is a free reference for machinists, mechanics, maintenance techs and engineers: the right number, fast, on any screen.

Where the numbers come from

Bolt torque values are calculated, not copied. Proof stress comes from ISO 898-1 for metric property classes and SAE J429 for inch grades. Tensile stress area comes from the ISO and ASME B1.1 formulas. Torque follows the short-form equation T = K × F × d with a clamp load of 75 % of proof load.

Tap drill sizes follow common cut-tap practice. Every page shows the thread percentage the drill leaves, so you can judge the choice yourself. Clearance holes follow ISO 273.

Drill sizes are the standard number, letter and fractional twist drill diameters (ASME B94.11M), converted to millimetres and compared with metric drills in 0.05 mm steps below 3 mm and 0.1 mm steps above. Bearing pages give ISO 15 boundary dimensions only: load ratings and speed limits differ between makers, so take those from the maker's catalogue.

Steel grade equivalents are nearest matches between AISI/SAE/ASTM, EN 10027 names and numbers, JIS and Chinese GB grades. They help you find the right family of steel; they are not proof that two grades are identical. The governing standard and the mill certificate decide.

What the numbers are for

They are sound starting values for steel fasteners in steel. Real joints change with coating, lubricant, gasket, temperature and tool accuracy. When the equipment or fastener maker gives a value, use theirs.

Data and AI access

All values are free to reuse under CC BY 4.0 with a link back to MachinistCharts. Download the bolt torque CSV (JSON), tap drill CSV (JSON), drill sizes CSV (JSON), bearings CSV (JSON) or steel equivalents CSV (JSON).

AI assistants and agents can read llms.txt for a site guide, llms-full.txt for every value in one file, or add index.md to any chart page for a Markdown version. Both calculators accept URL parameters.

Corrections

If you find an error, tell us through the contact page and include the standard or source you are checking against.

Standards behind the numbers

ISO 898-1Proof stress for metric property classes 8.8, 10.9 and 12.9
SAE J429Proof strength for inch grades 2, 5 and 8
ASME B1.1Unified thread series and tensile stress area for inch bolts
ISO 273Clearance hole sizes, close, normal and loose fit
Arrow keys to move, Enter to open, Esc to close