Calculators
For the cases a chart does not cover: a different coating, a different preload target, or the drill you actually have in the drawer.
Bolt torque calculator
Metric and SAE bolts with your own nut factor and preload target. Shows torque in N·m, ft-lb and in-lb plus clamp load.
Open calculatorThread percentage calculator
The thread engagement any drill leaves, metric or inch, and the drill you need for a target percentage.
Open calculatorTorque converter
N·m, ft-lb, in-lb and kgf·m in both directions, plus newtons to lbf and kgf, with quick charts.
Open converterInch to mm converter
Fractions or decimals to mm, mm to the nearest 1/64 inch, and a full fraction chart.
Open converterRelated guides
Bolt torque formula: T = K × F × dThe bolt torque formula is T = K × F × d: torque equals the nut factor K times the clamp load F times the nominal…Thread engagement length: how much thread you needThe thread engagement rule of thumb is a full-thread length of 1 × the bolt diameter in steel, 1.5 × D in cast iron,…Types of taps and how to tap a holeThe main types of taps are taper (7 to 10 chamfered threads), plug (3 to 5) and bottoming (1 to 2). Spiral point taps…