M20 tap drill size
The tap drill for an M20 × 2.5 metric coarse thread is 17.5 mm (0.6890 in). It leaves about 77 % thread, the normal range for steel.
Choose a drill
Each option redraws the section above with the thread it would leave.
M20 thread data
How much thread you need
Thread percentage to aim for by material.
Bars run from 50 % to 90 % thread. Typical shop practice for cut taps. Harder, tougher materials take less thread to save the tap; soft materials need more engagement to hold.
How the percentage is worked out
- D
- 20 mm, major diameter
- drill
- 17.5 mm
- P
- 2.5 mm pitch
Why not 100 %?
Going from 75 % to 100 % thread adds only about 5 % strength but roughly triples the torque needed to turn the tap. That is why the standard drill leaves 70–80 %.
For cut taps the quick rule is drill = major diameter − pitch. Form (roll) taps displace metal instead of cutting it and need a larger hole, roughly D − 0.5 P; check the tap maker's chart.
Other metric coarse threads
Related guides
Common questions
What size drill for an M20 × 2.5 tap?
Use a 17.5 mm drill. It leaves about 77 % thread engagement.
What is 17.5 mm in inches?
17.5 mm is 0.6890 inch.
What size clearance hole for M20?
ISO 273 gives 21 mm for a close fit, 22 mm normal and 24 mm loose.
How tight should an M20 bolt be?
About 441 N·m for class 8.8 with dry threads.
What are M20 screw dimensions?
An M20 screw has a 20 mm major (outside) diameter and a 2.5 mm coarse pitch; the external thread minor diameter is about 16.93 mm. A hex head takes a 30 mm wrench (ISO 4017; 30 mm under DIN 933) and a socket head cap screw a 17 mm hex key.
What is M20 in inches?
M20 is 0.787 in in diameter (20 mm). The closest inch size is 3/4 in (19.05 mm), but the threads are not interchangeable: M20 has a 2.5 mm pitch, 3/4-10 UNC has 10 threads per inch.