#69 drill size
A #69 drill is 0.0292 in (0.74 mm). It sits between #70 and #68 in the number series; the nearest metric drill is 0.75 mm.
#69 at a glance
Decimal, metric and the nearest sizes in the other series.
Nearest metric drills
Metric drills step by 0.05 mm below 3 mm and by 0.1 mm from 3 mm. Difference is metric minus inch size.
| Metric drill | Inch | Difference | In inches | Hole |
|---|---|---|---|---|
| 0.7 mm | 0.0276" | −0.042 mm | −0.0016" | Smaller |
| 0.75 mm | 0.0295" | +0.008 mm | +0.0003" | Larger |
Nearby inch drills
The next size down and up in each inch series, so you can pick a substitute from the drawer.
Threads a #69 drill can tap
No thread in the tap tables on this site falls between 55 and 85 % thread with this drill, so it is not a useful tap drill for them. Drills this size are mostly used for clearance, pilot and pin holes.
Number drill index
Every size in the series, holes drawn to scale.
Common questions
What size is a #69 drill?
A #69 drill is 0.0292 in, which is 0.74 mm (0.7417 mm exactly).
What is the metric equivalent of a #69 drill?
The nearest metric drill is 0.75 mm, 0.008 mm larger. The other close size is 0.7 mm.
Which fractional drill is closest to #69?
1/32 in (0.0312 in) is the closest, 0.0020 in larger.