410 stainless steel equivalents

410 stainless steel is nearest to EN 1.4006 (X12Cr13), JIS SUS410 and China GB 12Cr13. These are nearest equivalents, not identical grades: the governing standard or mill certificate decides.

Designations follow EN 10027 and EN 10088-1. Updated 6 October 2026.

EN steel number for 410

1.4006

X12Cr13 · SUS410 · 12Cr13

410 = EN 1.4006 X12Cr13 = JIS SUS410 = GB 12Cr13

AISI / ASTM / SAE US: 410
EN steel number EN 10027-2: 1.4006
EN steel name EN 10027-1: X12Cr13
JIS Japan: SUS410
GB China: 12Cr13
Family: Martensitic stainless

Nearest-equivalent designationsCheck the mill certificate

About 410

Martensitic stainless. General characteristics; check the standard and the supplier for anything critical.

What it is

The basic martensitic chromium stainless steel. It can be hardened and tempered by heat treatment, is magnetic, and has moderate corrosion resistance, below that of 304.

Typical uses

Pump shafts, valve trim, steam and gas turbine parts, cutlery, fasteners and general hardened parts in mildly corrosive service.

Machining notes

Machine in the annealed condition, then harden. Machinability is fair; it behaves more like an alloy steel than like 304.

Related grades

Grades people often compare with this one.

420 stainless steelHigher carbon for higher hardness1.4021 · SUS420J1 · 20Cr13 430 stainless steelNon-hardenable ferritic grade1.4016 · SUS430 · 10Cr17 17-4PH stainless steelPrecipitation-hardening alternative1.4542 · SUS630 · 05Cr17Ni4Cu4Nb

Fasteners and tapping

Stainless fasteners

Stainless bolts are graded to ISO 3506 (for example A2 and A4 austenitic), not to the ISO 898-1 classes in the bolt torque chart. Do not use those torque values for stainless fasteners; stainless threads also gall easily, so use an anti-seize and the fastener maker's figures.

Bolt torque chart

Tapping stainless

Stainless work-hardens and grips the tap. Aim for about 60–70 % thread: one size larger than the usual tap drill is common. The tap drill chart shows the percentage each drill leaves.

Tap drill chart

All stainless steel grades

Nearest equivalents across the five designation systems.

Stainless steel grade equivalents
AISI / ASTM	EN name	EN number	JIS	China GB
304	X5CrNi18-10	1.4301	SUS304	06Cr19Ni10
304L	X2CrNi18-9	1.4307	SUS304L	022Cr19Ni10
316	X5CrNiMo17-12-2	1.4401	SUS316	06Cr17Ni12Mo2
316L	X2CrNiMo17-12-2	1.4404	SUS316L	022Cr17Ni12Mo2
321	X6CrNiTi18-10	1.4541	SUS321	06Cr18Ni11Ti
303	X8CrNiS18-9	1.4305	SUS303	Y12Cr18Ni9
310S	X8CrNi25-21	1.4845	SUS310S	06Cr25Ni20
201	X12CrMnNiN17-7-5	1.4372	SUS201	12Cr17Mn6Ni5N
430	X6Cr17	1.4016	SUS430	10Cr17
410	X12Cr13	1.4006	SUS410	12Cr13
420	X20Cr13	1.4021	SUS420J1	20Cr13
440C	X105CrMo17	1.4125	SUS440C	108Cr17
17-4PH (630)	X5CrNiCuNb16-4	1.4542	SUS630	05Cr17Ni4Cu4Nb
2205 duplex	X2CrNiMoN22-5-3	1.4462	SUS329J3L	022Cr23Ni5Mo3N

Equivalents are nearest matches, not identical grades. Composition limits, mechanical properties and test requirements differ in detail between standards and product forms. For anything that matters, the governing standard, the drawing and the mill certificate decide.

Common questions

What is the European equivalent of 410 stainless steel?

The nearest EN grade is 1.4006, steel name X12Cr13.

What is the JIS equivalent of 410 stainless steel?

The nearest Japanese grade is SUS410.

What is the Chinese GB equivalent of 410 stainless steel?

The nearest Chinese GB grade is 12Cr13.

Is 1.4006 the same as 410?

1.4006 (X12Cr13) is the nearest European equivalent of 410, not an identical grade. Composition limits and required properties differ in detail, so check the governing standard or the mill certificate when it matters.

What is 410 used for?

Pump shafts, valve trim, steam and gas turbine parts, cutlery, fasteners and general hardened parts in mildly corrosive service.