MachinistCharts

Bearings

How to read bearing numbers

Short answer

How to read bearing numbers: split the code into type, series and bore. In 6205-2RS, 6 means deep groove ball bearing, 2 is the light series, and 05 × 5 gives a 25 mm bore. Bore codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm. Suffixes such as 2RS (rubber seals), ZZ (metal shields) and C3 (extra clearance) do not change the size.

By the MachinistCharts editors · Updated · 7 min read · Checked against ISO 15

Close-up of a steel ball bearing face next to a digital caliper on a surface plate

Key takeaways

  • The first digit is the bearing type: 6 is a single row deep groove ball bearing, 7 angular contact, 3 (five digits, as in 30205) tapered roller.
  • From bore code 04 up, multiply by 5: 6205 has a 25 mm bore, 6310 a 50 mm bore.
  • Bore codes 00, 01, 02 and 03 are fixed: 10, 12, 15 and 17 mm.
  • In a three-digit miniature bearing the last digit is the bore: a 608 has an 8 mm bore.
  • ABEC 1, 3, 5, 7 and 9 are tolerance classes, roughly ISO P0, P6, P5, P4 and P2. They are not speed ratings.

How to read bearing numbers: the basic code

A standard metric bearing number has three parts: a type digit, a dimension series digit and a two-digit bore code. Prefixes and suffixes around that core describe materials, closures, clearance and precision, but they never change the boundary dimensions set by ISO 15.

Take 6205 as the model:

  • 6 is the type: single row deep groove ball bearing.
  • 2 is the dimension series: light.
  • 05 is the bore code: 05 × 5 = 25 mm.

So a 6205 is 25 × 52 × 15 mm. Any maker's 6205 has these dimensions, which is why the bearing number is the most reliable way to identify a replacement. The full list of sizes is on the bearing size chart.

The type digit: what kind of bearing it is

The first digit or letters identify the bearing type. The system below is the common ISO-based scheme used by most major makers; a few makers add their own letters.

Type codeBearing typeExample number
3 (four digits)Double row angular contact ball bearing3205
1Self-aligning ball bearing1205
2Spherical roller bearing (and wide self-aligning ball bearings)22205
3 (five digits)Tapered roller bearing30205
4Double row deep groove ball bearing4205
5Thrust ball bearing51105
6Single row deep groove ball bearing6205
7Single row angular contact ball bearing7205
8Cylindrical roller thrust bearing81105
N, NU, NJ, NUPCylindrical roller bearing (letters give flange layout)NU205
NA, RNANeedle roller bearing with machined ringsNA4905
QJFour-point contact ball bearingQJ205

The same 05 bore code means 25 mm in every one of these examples. The different types of bearings and the loads they take are compared in a separate guide.

The series digit: how heavy the bearing is

The second digit is the dimension series. For the same bore, a higher series has a larger outside diameter and width, and carries more load. For deep groove ball bearings: 0 is extra-light, 2 light, 3 medium, and 8 and 9 are thin-section.

BearingSeries digitSeries nameBore × OD × width
68058thin-section25 × 37 × 7 mm
69059thin-section25 × 42 × 9 mm
60050extra-light25 × 47 × 12 mm
62052light25 × 52 × 15 mm
63053medium25 × 62 × 17 mm

Strictly, ISO 15 combines a width series and a diameter series into a two-digit dimension series, and the second digit of a 62 or 63 bearing is the diameter series. For reading a part number, the simple rule above is enough: the series digit tells you the OD and width for a given bore.

Bore code chart

The last two digits are the bore code. Codes 00 to 03 are fixed values; from 04 up, multiply the code by 5 to get the bore in mm. This works up to code 96 (480 mm).

Bore code (last two digits)Bore mmRuleExample 62 series
001000 is a fixed code6200 (10 × 30 × 9 mm)
011201 is a fixed code6201 (12 × 32 × 10 mm)
021502 is a fixed code6202 (15 × 35 × 11 mm)
031703 is a fixed code6203 (17 × 40 × 12 mm)
042004 × 5 = 206204 (20 × 47 × 14 mm)
052505 × 5 = 256205 (25 × 52 × 15 mm)
063006 × 5 = 306206 (30 × 62 × 16 mm)
073507 × 5 = 356207 (35 × 72 × 17 mm)
084008 × 5 = 406208 (40 × 80 × 18 mm)
094509 × 5 = 456209 (45 × 85 × 19 mm)
105010 × 5 = 506210 (50 × 90 × 20 mm)
115511 × 5 = 556211 (55 × 100 × 21 mm)
126012 × 5 = 606212 (60 × 110 × 22 mm)

The in-between bores 22, 28 and 32 mm are written after a slash: 62/22 has a 22 mm bore and 62/28 a 28 mm bore. Bores of 500 mm and up are also written after a slash, for example 60/500.

Miniature bearing numbers

Bearings with a bore under 10 mm use a three-digit number where the last digit is the bore itself in mm. A 608 is type 6, series 0, bore 8 mm.

BearingTypeSeriesBore = last digitBore × OD × width
6056 = deep groove ball05 mm5 × 14 × 5 mm
6256 = deep groove ball25 mm5 × 16 × 5 mm
6086 = deep groove ball08 mm8 × 22 × 7 mm
6296 = deep groove ball29 mm9 × 26 × 8 mm

Bearing suffixes: seals, shields, clearance and cage

Suffixes follow the basic number and describe closures, internal clearance, cage, precision and special features. The common ones below are close to universal; cage and design suffixes vary by maker, so check the maker's designation guide for anything not listed.

SuffixMeaning
ZMetal shield on one side
ZZ or 2ZMetal shields on both sides
RSRubber contact seal on one side
2RSRubber contact seals on both sides (maker variants: 2RSH, 2RSR, DDU, LLU)
RZ, 2RZRubber non-contact (low-friction) seal, one or both sides
NSnap ring groove in the outer ring
NRSnap ring groove with snap ring fitted
C2Internal clearance smaller than normal
CNNormal internal clearance (often not marked)
C3Internal clearance greater than normal
C4, C5Internal clearance greater than C3, and greater than C4
P6, P5, P4, P2ISO tolerance class tighter than normal (P0)
KTapered bore, 1:12 taper
MMachined brass cage (common usage; check maker)

Closures are compared in 2RS vs ZZ bearings, and the clearance groups in bearing fits and clearance.

Bearing prefixes

Prefixes come before the basic number. They mostly mark material or a non-standard form:

  • S, SS or W: stainless steel rings and balls (the letter depends on the maker). See 440C stainless.
  • F: flanged outer ring, common on miniature bearings.
  • MR: metric miniature series.
  • R: inch-dimension series (for example R8).
  • Letters for components: some makers use prefixes for a loose inner ring, outer ring or roller-and-cage assembly.

Bearing numbers explained: worked examples

6205-2RS

6 = deep groove ball bearing, 2 = light series, 05 × 5 = 25 mm bore. 2RS = rubber contact seals on both sides. Size: 25 × 52 × 15 mm (0.984 × 2.047 × 0.591 in). Normal clearance and normal precision, because neither is marked.

6303ZZ C3

6 = deep groove ball bearing, 3 = medium series, 03 = 17 mm bore (fixed code). ZZ = metal shields both sides. C3 = internal radial clearance greater than normal, used where an interference fit or a warm shaft would otherwise remove too much clearance, as in many electric motors. Size: 17 × 47 × 14 mm, the same as an open 6303.

608ZZ

6 = deep groove ball bearing, 0 = extra-light series, 8 = 8 mm bore (miniature, so the digit is the bore). ZZ = metal shields both sides. Size: 8 × 22 × 7 mm. The sealed version is 608-2RS. The bore is often called 8 mm; it is not 5/16 in (7.94 mm), so check before fitting it to an inch shaft. The inch to mm converter helps with that check.

Bearing identification when the number is worn off

Measure the bore, outside diameter and width with a caliper in mm and look them up on the bearing chart. Three measurements identify a deep groove ball bearing; a 25 × 52 × 15 mm bearing is a 6205. Then note the closure (shields, seals or open) and whether the outer ring has a snap ring groove. Precision class, clearance and cage cannot be judged by eye.

ABEC bearing rating and ISO precision classes

An ABEC bearing rating is a tolerance class set by the American Bearing Manufacturers Association (ABMA). The odd numbers 1, 3, 5, 7 and 9 run from normal to the tightest tolerance. ISO 492 defines the equivalent classes Normal (P0), 6, 5, 4 and 2.

ABEC class (ABMA)ISO 492 classDIN suffixTypical use
ABEC 1NormalP0General machinery, motors, pumps, conveyors
ABEC 3Class 6P6Quieter motors, better running accuracy
ABEC 5Class 5P5Precision spindles, instruments
ABEC 7Class 4P4Machine tool spindles, high-speed precision
ABEC 9Class 2P2Ultra-precision spindles, gauges

The match between ABEC and ISO classes is close but not exact for every tolerance and size range, so a drawing should name one system. Most standard catalog bearings, including ABEC 1 bearings, are made to normal tolerance unless a P-suffix says otherwise.

Why ABEC is not a speed rating

ABEC classes control dimensional tolerances (bore, outside diameter, width) and running accuracy (radial and axial runout). They do not specify ball grade, cage design, lubricant, seals or internal clearance, which are what mainly decide speed capability, friction and noise. A higher ABEC number can run more smoothly at speed in a precise machine, but it does not give a bearing a higher speed rating. Limiting speeds come from the maker's catalog.

Sources and standards

  • ISO 15, Rolling bearings, radial bearings, boundary dimensions, general plan
  • ISO 492
  • ISO 5753-1
  • ABMA Std 20

General reference information. When a manufacturer, drawing or governing standard gives a value, that value takes precedence.

Related charts and guides

Common questions

How do you read bearing numbers?

Split the number into type, series and bore. In 6205, 6 is a deep groove ball bearing, 2 the light series, and 05 the bore code. Bore codes 00 to 03 mean 10, 12, 15 and 17 mm; from 04 up multiply by 5, so 05 is 25 mm. Letters after the number describe seals, shields, clearance and precision.

What does the number on a bearing mean?

The number identifies type and size. The first digit is the type (6 = deep groove ball bearing), the second the dimension series (0, 2, 3, 8 or 9), and the last two digits the bore code. A 6205 is 25 × 52 × 15 mm from any maker. Suffixes such as 2RS, ZZ and C3 add features without changing size.

What does 2RS mean on a bearing?

2RS means the bearing has a rubber contact seal on both sides. One RS is a seal on one side only. Makers write it differently: SKF 2RSH, FAG 2RSR, NSK DDU and NTN LLU are all double contact seals. A 6205-2RS has the same 25 × 52 × 15 mm size as an open 6205.

What does C3 mean on a bearing?

C3 means the bearing has more internal radial clearance than normal (CN). It is used where an interference fit, a hot shaft or a temperature difference between rings would reduce clearance too much, as in electric motors. C3 does not change the bore, outside diameter or width.

What is an ABEC bearing rating?

ABEC is the ABMA tolerance class for ball bearings: ABEC 1, 3, 5, 7 and 9, roughly equal to ISO 492 Normal (P0), P6, P5, P4 and P2. Higher numbers mean tighter dimensional and runout tolerances. ABEC is not a speed rating; speed depends mainly on lubrication, cage, seals and design.

What size is a 608 bearing?

A 608 bearing is 8 mm bore, 22 mm outside diameter and 7 mm wide. The number reads as type 6 (deep groove ball bearing), series 0 and bore 8 mm, because in three-digit miniature bearings the last digit is the bore itself. 608ZZ is shielded and 608-2RS is sealed.

What does the 0 in 6000 series bearings mean?

In a 6000 series bearing the 0 is the dimension series: extra-light. A 6005 is 25 × 47 × 12 mm, lighter than a 6205 at 25 × 52 × 15 mm or a 6305 at 25 × 62 × 17 mm. The last two digits, 00 in a 6000, are the bore code, here 10 mm.

Arrow keys to move, Enter to open, Esc to close