# 626 bearing dimensions

A 626 bearing is 6 mm bore × 19 mm outside diameter × 6 mm wide (0.236 × 0.748 × 0.236 in). The sealed version is 626-2RS; the shielded version is 626-ZZ.

## 626 data

- Type: deep groove ball bearing, 62 series (light)
- Bore d: 6 mm (0.2362 in)
- Outside diameter D: 19 mm (0.7480 in)
- Width B: 6 mm (0.2362 in)
- Bore code: Under 10 mm bore the last digit is the bore itself: 6 = 6 mm
- Sealed: 626-2RS; shielded: 626-ZZ; open: 626

## Designations by maker

| Maker | Sealed | Shielded |
|---|---|---|
| SKF | 626-2RSH | 626-2Z |
| FAG (Schaeffler) | 626-2RSR | 626-2ZR |
| NSK | 626DDU | 626ZZ |
| NTN | 626LLU | 626ZZ |
| Koyo (JTEKT) | 626-2RS | 626ZZ |
| Timken | 626-2RS | see catalogue |

## Same 6 mm bore, other series

| Bearing | Series | OD mm | Width mm |
|---|---|---|---|
| 606 | extra-light | 17 | 6 |
| 626 | light | 19 | 6 |


Load ratings and speed limits vary by maker: take them from the manufacturer's catalogue.

## FAQ

**What size is a 626 bearing?**
6 mm bore, 19 mm outside diameter and 6 mm wide, which is 0.236 × 0.748 × 0.236 in.

**What does 2RS mean on a 626 bearing?**
626-2RS has rubber contact seals on both sides. 626-ZZ (also written 626-2Z) has metal shields on both sides. Both have the same 6 × 19 × 6 mm dimensions.

**Is 626-2RS the same as 626-ZZ?**
They are the same size and interchangeable in a housing. The sealed 626-2RS keeps out fine dirt and water better; the shielded 626-ZZ runs with less friction.

**What is the SKF equivalent of 626-2RS?**
SKF writes it 626-2RSH; FAG 626-2RSR, NSK 626DDU, NTN 626LLU and Koyo 626-2RS. Check the maker's catalogue for the exact seal type.

**What does the number 626 mean?**
6 is the deep groove ball bearing type, 2 is the light dimension series, and under 10 mm bore the last digit is the bore itself: 6 = 6 mm.

**Which bearings have the same bore as 626?**
606 also have a 6 mm bore, with different outside diameters and widths.

Source page: https://machinistcharts.com/bearing/626/
Updated: 2026-10-06
Publisher: MachinistCharts (https://machinistcharts.com)